null Skip to main content

Aladdin Lamp Wicks and Chimneys

Aladdin Lamp Wicks


and Parts

Aladdin Lamp Wicks - Mantles - Burner Parts -
Wick Cleaner - Caps & Gaskets - Chimneys
Aladdin Refrigerator wick

Model Numbers - Years Sold - Aladdin Lamp History

Aladdin Heater wicks

Burner Exploded Views and dates of manufacture

How to use Aladdin lamps -
the "Aladdin Enjoyment Manual"

pdf download

The model # of each lamp is designated on the wick raising knob (except Models 1-4).

NOTE ON SHIPPING COST. The automatic postage cost is calculated on the total cost of items but the wicks but items below are very lightweight. The automatic postage charged for multiple items on the same order may well be too high but we do refund any excess paid over the actual cost of mailing.

UPDATE Oct. 22.2020 - Aladdin has raised their prices on most items (MSRP) and have threatened me to keep my prices to their "high 'standards'' (MSRP) or they will sell me no more products. I do not purchase Aladdin heater wicks, lamp wicks or chimneys from the US Aladdin lamp importer so I can sell them below their MSRP.

IMPORTANT: Aladdin is now selling ''Round Wick'' lamps, not identifying them correctly as ''Kosmos" lamps with 2 1/2'' wide flat wicks. These wicks are available on the "Kosmos Wicks'' page (<click) along with installation information.

The instructions printed on the Aladdin lamp wick boxes below say to "pass the paper tab through the two semicircular slots in the burner base." There are no paper tabs on the new wicks - the boxes are old and incorrect. Just pull the ''tails" of the wick through the slots in the burner base.

WICKS: Lamp numbers
to fit models:

Stock number

Photo

Cost

Add to Cart

Mantles = Models 12,14 (English), A, B, C, 21, 21C, 23 & 23A Aladdin Lamps: Fits any Aladdin with a glass base or a metal base with no center air tube, and #12. (For center draft Aladdin lamps, models 3 to 11, use the Kone Kap Mantle Adaptor to use this R150 mantle.) R150

40 cp

Aladdin Lamp Wicks
Aladdin MSRP
(See above)
Sorry

NOW IN STOCK!

Order on WickShop.com Aladdin Model A, B, Nu Type B, C & Super Aladdin; S-15 burners, type "NU"; Model 75; Model C Modified Brazil #2 burner 1975-1976. Pin/stud diameter apprrox. 5/16'' and distance from the TOP of the pin to the top of the wick is 1 1/2''. (Old photo with paper tabs on wick > R-151 (P989986) - #53

Aladdin Lamp Wicks

Order on WickShop.com Aladdin Lamp Models 7 to 12 wick. (Note: Model 6 Aladdin; Use Aladdin wick R199 (below) by removing the metal tabs and installing in old #6 wick raiser. Wick has two pins/studs approx 5/16" in diameter and the distances from the top of the wick to the TOP of the stud is approx 1 13/16". Click here for reference. N198 - (P989952) - #55

Aladdin Lamp Wicks

Order on WickShop.comAladdin Lamp Model 14 wick (English) only for the 'Super Aladdin' burner. Wick has two pins approx 1 3/8'' from the top of the pin to the top of a new wick. (Click on photo to enlarge it.) P989902 - #54

Aladdin 14 P

Order on WickShop.com R199 wick for Aladdin Lamp Models 5, 6, 21, 21C & 22. Two clips 1 5/16" down from the top of the wick to the top of the clip. The clip opening is 0.370" - 5.16''. Aladdin part #P979906 but discontinued by Aladdin #21

These are Valor brand wicks. Valor is owned by Hattersley-Aladdin.

These wicks were made by Aladdin.

SPECIAL!

Order on WickShop.com Aladdin Lamp Models 23, 23A, 23E60 wick (all Aladdin lamps made since 1963); Brass hanging lamps 4441001-4, P444051; Part N-230, Series 23 burners (23E60 and 23E Fridge Burners); OEM P23904; 239936; (Wick measures 1 1/8" OD diameter, clip opening is 9/32" and the distance from TOP of the wick down to the top of the clip is 1 1/4''.)

(Will also work for Model 21 if used with the N233 wick raiser - out of stock by Aladdin).

N230 (P239936) - #51Aladdin Lamp WicksOrder on WickShop.com Aladdin Refrigerator wick
1/2" Diameter wick; Model 32 Blue Flame, P99908. No. 32 HALF INCH REFRIGERATION BURNER WICK. (Replacement Glass Flue below) No. 32

Mod 32 wick

Order on WickShop.com If you need a 1'' Aladdin lamp wick with the clips removed, such as for the Aladdin #5 & 6, Miller ''Sundart'' Incandescent, Sears "Bright as Day" and Coleman #160 Kero-Lite, etc, use Aladdin lamp wick #21 above and remove the clips. More information on mantle lamps other than Aladdin, such as the Practicus, see Dr. Courter's website. Practicus, other brands. Lamp Brass Wick Trimmer

Reproduction Aladdin Wick Trimmer Works with all Aladdin LAMP burners produced with 1" wicks (All wicks above except the #32 1/2'' refrigerator wick). (Models 2 thru 23)

795 Wick CleanerOrder on WickShop.com Parts - (Aladdin_Chimneys: How to determine which chimney fits your Aladdin lamp burner. >>>Aladdin heeless%20base Click on the images to enlarge them.Aladdin Lox On%20burnerFOR ALADDIN twist Lox-0n. NOT Aladdin brand; 2 5/8'' x 12 1/2'', thicker, stronger but less expensive. Borosilicate glass, very smooth, with flame cut ends that virtually eliminate end ''flaking'' or ''flea bites.'' NOT Aladdin brand - BETTER!!!

LIMIT 2 CHIMNEYS PER ORDER FOR SAFE SHIPPING

Twist lock

FITS ALADDIN Models A, B, C, 12, 14, 21, & 23 galleries.

Lox-0n

Order on WickShop.com FOR ALADDIN slip-fit HEEL-LESS. Not Aladdin brand; 2 5/8'' x 12 1/2'', thicker, stronger but less expensive. Borosilicate glass, very smooth, with flame cut ends that virtually eliminate end ''flaking'' or ''flea bites.'' NOT Aladdin brand - BETTER!

LIMIT 2 CHIMNEYS PER ORDER FOR SAFE SHIPPING

Heelless

For Aladdin brand lamp burners models 3 thru 11.

HEEL-LESS

Order on WickShop.com Kone Kap Mantle Adapter
Solid Brass Kone Kap Mantle Adaptor (Converts Models 3-11 for use with an R150 Mantle). Use this cone if you are using your Aladdin lamp as a heater without the mantle. May work with the Beacon (Home Lamp Company.) N146-A

Aladdin Lamp Wicks

OUT OF STOCKOrder on WickShop.com Model 23 Burner Gallery - Solid Brass-fits Models 7 through 23 - Uses Heelless Slip chimneys instead of the miserable, easily-broken Lox-On Chimney. N239AN

Nickel

N239AN

OUT OF STOCKOrder on WickShop.com

Cork Gasket for Glass Fonts N120CG

N120CG Filler Cap Cork

Order on WickShop.com Fill Plug, Nickel, for K102, BH210, B225, #N114N, larger diameter threads, does not fit other lamps NOS

Aladdin Lamp Wicks

Order on WickShop.com Rubber Gasket for filler plugs N115RG

N115RG FillerGasket Rubber

Order on WickShop.com Flame Spreader
for Aladdin lamps models 12, A, B, C, 14-English, 21, 21C, 23, 23A and 23E60, according to Model B isometric. N106

Aladdin Lamp Wicks

Order on WickShop.com Smoke Bell, Brass,
for hanging lamps 102-1A

Aladdin Lamp Wicks

Order on WickShop.comAladdin Burner Wick Gauge, part #P969903, for refrigerator burner #23E60. 23E60

Aladdin Lamp Wicks

Order on WickShop.com KOZY GLOW soft inverted mantles, similar to Aladdin #2 Ceramic soft mantles. FOR GAS LAMPS, not Aladdin non-pressure mantle lamps.

price on WickShop, per card of 2 mantles

Kozy Glow Mantles 1

Kozy Glow Mantles 2

Kozy Glow Gaslight Mantles%20 %201

Click images to enlarge

Order on WickShop.com Model 32 Refrigeration Borosilicate Glass Flue P991100

Model 32 Refrigeration Borosilicate Glass Flue

Order on WickShop.com

Model/Years Sold
1 ................ May 1909-August 1910
2 ............... September 1910-December 1910 Sold in the USA from 1909 to Present

Aladdin lamps were made in the USA until 1963 (by Plume & Atwood, Meriden, CT), after which brass lamps were imported from England. Only the glass lamps continued to be made in the USA. Since 1977 the Aladdin burners have been manufactured in Hong Kong while the fonts are made in the USA and England. Chimneys, wicks and mantles are made in other countries today.
The early lamps (Models 1 through 12) were made primarily of brass and nickel plated. Models 1-12 are center-draft lamps. Subsequent models use side draft burners which cannot be used in the earlier lamps. The side-draft burner permitted the company to make glass fonts and beginning in the 1930s glass lamps were made in many attractive colors and patterns.

The model of each lamp is designated on the wick raising knob (except Models 1-4). Models changed as improvements were made due to new patents, or changes in the operating mechanism. Many of the models look very similar in outer appearance. Some parts are interchangeable while many are not.

Aladdin lamps were also manufactured in England, Australia and Brazil:

England Sales were established in England in 1919, importing directly from the USA. Manufacturing of the following models began there in 1933. Since about 1955 Aladdin UK lamps and burners are made in China and imported through Hong Kong. See Aladdin Lamp History for more information.

Burner Exploded Views (Courtesy of Aladdin Mantle Lamp Company)

MODEL A (May 1932 until December 1932)

MODEL B (Feb. 1933 until September 1955) The great floods of August, 1955 destroyed the factory and all the tooling.

MODEL C (October 1955 until April 1963)

MODEL 1 (May 1908 until April 1909)

MODEL 2 (May 1909 until August 1910)

MODEL 3 (January 1911 until August 1912)

MODEL 4 (Sept. 1912 until August 1912)

MODEL 5 (Sept. 1913 until August 1914)

MODEL 6 (Sept. 1914 until July 1917)

MODEL 7 (August 1917 until July 1919)

MODEL 8 (August 1919 until August 1920)

MODEL 9 (August 1920 until August 1920)

MODEL 10 (May 1921 until August 1922)

MODEL 11 (Sept. 1922 until May 1928)

MODEL 12 (May 1928 until April 1935) {Center draft lamp.}

The lamps above were made in the old Plume & Atwood factory in Meriden, CT.

MODEL 14 ENGLISH (1933 - 1953). (Made in England from 1933 until 1953, replacing the Model B. This was a side-draft style lamp. Aladdin lamps made after this date were made in China and were side-draft lamps.

MODEL 21 (1955 - 1963)

MODEL 21C (1955 - 1963)

Model 23 (1963 - 1977)

MODEL 23A (1963 - present)

MODEL 23E REFRIGERATION

MODEL 32 REFRIGERATION