Reproduction wick for Aladdin S-1 & S-2, heaters Model 50, 51.
Obsolete for over 50 years, this wick must be made by hand using the appropriate wick material cut to fit.
Includes installation of clips on your wick IF you send me the wick clips from the old wick!
If not, the proper eyelets, rivets and installation instructions are included for you to install the clips. The OEM brass wick strip clips must be installed using eyelet rivets (included) . The holes
for the eyelets are 3 3/4" down from the top on
opposite sides of the wick. An eyelet punch is
required. New brass clips are NOT AVAILABLE!
NOTE: Factory wicks and clips have not been made over 50 years, if you don't have an OEM wick with the clips, you are out of luck.
