Replacement wick sets: 10-wick set (#210) | 16-wick set (#216) | 22-wick set (#222)
Butterfly #A-822 | Butterfly #2487 | Butterfly #2641 | Butterfly #2698 Cook Stove | Butterfly #2412 Pressure Stove | Butterfly #2418 Double Burner Stove | Butterfly #2421 Oven | Butterfly #828R Pressure Lantern | Petromax / Butterfly 828 Owner's Manual
Butterfly #A-822, 22 Wick Aluminum Stove
BUTTERFLY #A-822, PREMIUM 22 WICK ALUMINUM STOVE
The new Butterfly A-822 may well just be the best kerosene cook stove yet for those looking to store a stove until it is needed, then expect that stove to last for decades of very hard use. Because virtually all parts are made from aluminum, they will not rust in storage. The catalytic cylinders are steel - that is all. And this stove produces enough heat for any canning and baking needs, and do so every day, all day long, for decades. Made in Indonesia, these stoves are used in restaurants throughout Southeast Asia as daily use stoves.
How do I rank the Butterfly A-822? I have all of the multi-wick Butterfly stoves and the 2418 gravity flow stove, plus other assorted kerosene stoves. This stove will do it all. The quality and size are evident. The heat output is sufficient to enable it to work as an emergency heater. And the aluminum construction means it won't rust in storage. There are no glass or fragile parts to break. It is easy to light and use. If I had to have only one kerosene stove to keep in storage until needed - and know it would be there ready to use for all my canning and baking needs, this is the one.
This stove is easy to use. The square shape with open sides like the #2487 means it is easy to light all 22 wicks. That is a major benefit when the stove has to be used repeatedly all day long! At 6 pounds, 10 ounces it is light enough to easily carry when required. The all-steel 22 wick Butterfly stove #2698 weighs in at almost 10 pounds, for example.
St.PaulMercantile.com was the source for Butterfly stoves and pressure lanterns. John Squires, owner of St. Paul Mercantile.com, passed away in April, 2025. John operated the business in a very ethical manner for many years and will be greatly missed. I do not know from whom Butterfly stoves will be available now. |
Disassembly is the first step. At this point every part can be examined so you can be thoroughly familiar with the stove. And now is when each piece is given a coat of liquid auto polish. The polish seals the pores in the metal so spilled liquids are easy to clean up and do not leave a stain. Yes, I know it is aluminum and aluminum does not rust, but it can still oxidize. I apply a coat of auto polish to clean off any preservative oil and protect the finish of any metal stove, heater or lamp as the first step. Then I know it will look good for years. |
The wicks are installed by pulling them up from the bottom. First, though, the fuel gauge is removed so it does not get in the way. I used a large straightened paper clip to pull the wicks through - it is visible in the right hand photo. The wick riser is at maximum height - the wicks will retract down into the wick tubes. |
The photo at right shows all the wicks installed. Note that the wicks are in a trough or groove with lips or ribs on each side of them. Those ribs are your height cutting guides. The wicks have been pulled down from the bottom so the tops of the wicks are about level with the guide cutting ribs. The stove can now be assembled and fueled for the first burn. If you are going to store this stoveuntil needed, stop right here before fueling. The next steps can be completed within a few hours and the stove will be ready to use. |
The first burn should be done outside because there will be fumes. The preservative oil on the catalytic converter burner unit will burn off, and they need to get hot enough to properly season and anneal. Adjust the wicks down during this first burn to eliminate any really tall flame spikes that could produce soot. There will be flame spikes during this burn because the wicks are new and not level.
Once the stove cools down completely, the wicks can be leveled so the stove burns without flame spikes. Using pliers, pull the wicks up slightly above the wick slot. Now you can lay a pair or sturdy scissors or shears across the wick cutting guides and trim all of the wicks to the same height. The design of this stove is that as tar and carbon build up on the tops of the wicks, the wicks can be trimmed less than 1/4 inch to get a new burning surface. That is why the wicks are so long - they last a long time even with frequent trimming as needed when the stove is used on a daily basis.
Do not let the stove run out of fuel. Turn it off by lowering the wicks. There will be lingering flames after you lower the wicks completely. Let those flame dwindle down for a few minutes before blowing them out. If you don't, the fumes in the catalytic converter will smell quite badly! If you let the stove run out of fuel the wicks will burn down level with the bottom of the wick slot and make pulling them up quite difficult.
The Butterfly A-822 is a large stove. The base is 12" square and the height to the top of the pan bracket is 13 1/2". The size and strength of this stove enables it to easily support even oversize stock pots, as shown in the photo at right. Notice the reinforcing brackets at the corners - it is strong enough for very heavy duty use. |
Kerosene Stoves, Lanterns and Ovens
- Kerosene Stoves - Recommendations on different models New!
- Kerosene Stove Maintenance and Storage
- Butterfly A-822, 22 wick, all-aluminum premium stove. New!
- Butterfly #2487, 16 wick stove.
- Butterfly #2412 Pressure Stove;
- instructions for virtually any pressure stove.
- Butterfly #2418 Double Burner Stove;
- good with any gravity flow stove.
- Butterfly #2421 Oven for Kerosene Stoves
- Butterfly #2641, 10 Wick Stove -
- the least expensive emergency stove.
- Butterfly #2698 Cook Stove -
- THE Best Heavy Duty Cook Stove.
- Butterfly #828R Pressure Lantern;
- same for most pressure lanterns.
- Haller "Origineel" Stoves
- Mini kerosene heaters;
- also mini stoves made from old brooder lamps.
- Sad Iron stoves;
- examples of, and wick replacement. Wicks are here.
- "Wickless" Stoves & Ranges,
- and wicking for them.
Butterfly #2487, 16 Wick Stove
BUTTERFLY #2487, 16 WICK STOVE
The Butterfly #2487, 16 wick stove is the first Butterfly stove I have used which is large enough - and strong enough - to hold a large stock pot or water bath canner. I decided to put the #2487 to a tough test, boiling 4 gallons of water in a tall stock pot while breaking in the stove. During break-in, the wick tops are hardening and thus are not properly trimmed until after the first good burn, so the maximum heat potential is not reached. Nevertheless, the Butterfly #2487 shown below brought 4 gallons of water to a boil inside of 25 minutes. This stove is capable of canning or large pot simmering, like reducing/condensing tomato sauce or maple syrup. The maximum heat output is also easily sufficient for baking bread using the Butterfly #2421 oven. Yet by lowering the wicks, a low heat can be maintained for frying eggs or whatever without burning. If you saw the less expensive Butterfly stoves sold during Y2K, this stove will amaze you - no sharp edges, nice paint job, truly a finished product, and the open-side design makes lighting this stove for regular use very easy.
St.PaulMercantile.com was the source for Butterfly stoves and pressure lanterns. John Squires, owner of St. Paul Mercantile.com, passed away in April, 2025. John operated the business in a very ethical manner for many years and will be greatly missed. I do not know from whom Butterfly stoves will be available now.
Shown at left is the Butterfly #2487. At a little over 12 inches wide and 9 inches high, the #2487 is small enough to be portable. The 11 1/2" wide pot/pan support bracket is easily wide enough to support large pots, while the folded corners lend sufficient strength to hold the weight easily. |
The #2487 shown here with the wick mechanism and burner removed. The fuel tank is seamless and therefore does not spill easily when moved - a huge improvement over earlier Butterfly stove designs. To light the wicks, the handle on the "burner" is raised, exposing the wicks. A long bamboo skewer is easier to use than a match. |
The Butterfly #2487 comes completely assembled except for installation of the supplied wicks. I use a foot long piece of soft wire folded in half, fold the wick in half, and pull the wick up through the wick tube from the bottom. The height of the wick above the top plate is irrelevant at this point. It is important to note on the photo at left the raised outer ring around the wicks and the raised inner section - those raised sections are the guides for proper, level wick trimming. |
View of the wicks pulled through the wick tubes. Note the wicks protruding above the top - above the trim guides as shown in the photo above. At this point the wicks can be manually pulled down from underneath until the tops are all level with the trim guides. After the initial wick installation, when the top of the wicks become ragged or coated with tar, the wicks are pulled up one at a time. Then sturdy shears or scissors are laid flat across the wick guides and the top of the wicks snipped off. It actually takes very little time to trim the wicks. |
At left is a view of the wick raising mechanism upside down, wicks installed. The beauty of a multi wick stove is in those wicks. All wicks become ragged with use. Expensive wicks must then be thrown out. But the long wicks used in this stove need only have 1/4" snipped off the top of a wick after extensive use - and there are a lot of quarter inches in those long wicks! When new wicks are eventually needed, they can be purchased OEM wicks...or strands from a cotton mop. With a multi-wick stove you need never be out of wicks! |
As with all kerosene powered equipment, the Butterfly #2487 should be broken in for a couple of hours by burning it in a location with ventilation (garage, shielded porch, etc). The catalytic converter ("burner") unit must get hot for awhile to anneal the steel properly and burn off any protective oil, and that means some fumes on the initial "break-in" burn. After break-in, the #2487 burns very cleanly, but it is common sense to use a kerosene stove near some ventilation, and not move the stove while lighted and hot.
Pages on this web site:
Kerosene Stoves, Lanterns and Ovens
Butterfly #2641, 10 Wick Stove
Butterfly #2641, 10 Wick Kerosene Stove by Miles StairIn an ideal world, everyone would have a kerosene stove. I consider a kerosene kitchen stove to be central to the concept of being self-reliant. Every year the electric power goes out for almost everyone during storms or hurricanes. Without the ability to cook and heat a home, many people evacuate to a motel - and spend more per day than the cost of a kerosene stove! Absurd, but it happens almost every day somewhere in the country. And what about a manufactured event, like the avian flu? Government plans already on the books call for people to be quarantined in their homes. Smart people will want to self-quarantine to avoid unnecessary exposure to pathogens. But what is to stop terrorists from then knocking down an electric transmission tower in a remote area? Given that the electrical grid is tied together, an entire region would lose power. And who would break quarantine to fix that problem? Without a kerosene stove for cooking and a little heat, millions of people could suffer terribly. Many would be forced to go to a shelter, a crowded shelter, and thereby almost ensure they would catch what the least resistant person in the shelter was spreading about. No thanks.
And that is the great utility of the Butterfly #2641, 10 wick stove. No one in their right mind would buy the least expensive stove available for cooking every day for the rest of their lives. But everyone should have the least expensive cook stove just for that occasional power outage or other event so they can have the ability to stay in their own home.
St.PaulMercantile.com was the source for Butterfly stoves and pressure lanterns. John Squires, owner of St. Paul Mercantile.com, passed away in April, 2025. John operated the business in a very ethical manner for many years and will be greatly missed. I do not know from whom Butterfly stoves will be available now.
The Butterfly #2641, shown at left, comes assembled except for wick installation. At about 8 1/2" square, this is the smallest mulit-wick kerosene cook stove available. The compact size allows it to be stored easily in the shipping box until needed. Click on the photos to enlarge them. | |
I must make the assumption that those using a #2641 will be occasional users and therefore not completely familiar with the operation of kerosene stoves. For the sake of safety, the fuel tank should never be more than half filled. And because this is a small stove and stoves get hot (or they would not be able to cook food!), it is safer to use the stove when it is sitting inside a strong metal tray of some kind. Any spilled fuel is contained and the stove is easy to carry. The tray at left is a Blitz dog food tray, sold inexpensively at Wal Mart [UPC code 004454911897]. |
Wick installation is the same as for any multi-wick stove, and full instructions are given on the page for the Butterfly #2698 stove. As with all metal appliances, the Butterfly #2641 should be treated with care before use and before storage.
There are three tabs on the cast iron top plate of the #2641 which fold out. For normal cooking, leave them folded in. If using the stove as an emergency heater, fold the tabs out and place a heavy metal plate or concrete block on the tabs. The flame should be adjusted to NOT impact on the plate or block. The plate or block will act as a heat diffuser.
The #2641 is a no-frills stove, but it's cheap and it will boil water for coffee and cook bacon and eggs. St. Paul Mercantile used to carry the #2457 single-burner stove but has replaced it at my suggestion with the #2641 because it has a better fuel tank design, no sharp edges, and it comes pre-assembled. If you plan to use your stove more than for an occasional, short power outage, then I'd recommend a larger, hotter stove. If you plan on doing a lot of canning, the 16 wick #2487 or the 22 wick #2698 are excellent stoves. For everyday cooking of meals, the single burner #2413 and the double burner #2418 and #2419 are excellent - they are the best selling stoves in Asia. For everyday cooking for a large family, the three-burner #2415 and #2417 are excellent. Be absolutely sure to order order extra wicks, as they will not be available during a dire emergency!
Pages on this web site:
Kerosene Stoves, Lanterns and Ovens
- Kerosene Stoves - Recommendations on different models New!
- Kerosene Stove Maintenance and Storage
- Butterfly A-822, 22 wick, all-aluminum premium stove. New!
- Butterfly #2487, 16 wick stove.
- Butterfly #2412 Pressure Stove; instructions for virtually any pressure stove.
- Butterfly #2418 Double Burner Stove; good with any gravity flow stove.
- Butterfly #2421 Oven for Kerosene Stoves
- Butterfly #2641, 10 Wick Stove - the least expensive emergency stove.
- Butterfly #2698 Cook Stove - THE Best Heavy Duty Cook Stove.
- Butterfly #828R Pressure Lantern; same for most pressure lanterns.
- Haller "Origineel" Stoves
- Mini kerosene heaters; also mini stoves made from old brooder lamps.
- Sad Iron stoves; examples of, and wick replacement. Wicks are here.
- "Wickless" Stoves & Ranges, and wicking for them.
Butterfly #2698 Cook Stove
Butterfly #2698 Cook StoveThe Butterfly #2698 cook stove is perhaps the best stove available for heavy duty cooking, canning, boiling maple syrup, baking, etc, with 22 wicks producing 14,000 BTU/hr. At 12.5" high and 14" wide, this is a large stove! The #2698 has the strength to easily support a waterbath canner or pressure cooker, and makes the Alpaca stove look like a feeble toy by comparison. If you saw the less expensive Butterfly stoves sold during Y2K, this stove will amaze you - no sharp edges, nice paint job, truly a finished product.
St.PaulMercantile.com was the source for Butterfly stoves and pressure lanterns. John Squires, owner of St. Paul Mercantile.com, passed away in April, 2025. John operated the business in a very ethical manner for many years and will be greatly missed. I do not know from whom Butterfly stoves will be available now. |
The Butterfly #2698 stove comes completely assembled except for installing the wicks. It is at this stage that the stove should be inspected and polished. Normal liquid auto polish should be applied to all surfaces, inside and out. All it takes in about 15 minutes, and the pores of the enamel are filled, the stove will not rust in storage, nor will spilled food cause any stains. You can prove to yourself how important polishing is to metal. Take two plain nails and apply a coat of polish to one of them. Put both nails on a fence post or other exposed location. Within days one nail will be horribly rusted while the polished nail is pristine. |
Make a hook on the end of a thin piece of wire as a wick installation tool. Fold each wick in half, slip the fold into the hook, and push the wire up from the bottom. Grab the wire and pull the wick up past the top about an inch. Repeat until all 22 wicks are installed - and too high. |
See the raised lips on each side of the wick? Those are the guides for trimming the wicks level. Turn the wick knob to raise the wicks to their highest position, then pull them back even in height with the raised guides. That is the last time you will have to pull the wicks down. From now on, if the wicks need trimming they are pulled up a quarter inch and trimmed level by laying a pair of sturdy scissors across the two guides. When the wicks are retracted they will disappear down into tubes. That is how the stove is shut off. |
The Butterfly #2698 is now ready for use. To light the #2698, remove the red top and the black catalytic converter, raise the wicks, light them, then replace the catalytic converter and top piece. Turn the wick knob to lower the flame height until the catalytic converter is, then adjust the flame height to obtain the heat output you need. Regulate the heat output as needed by raising or lowering the wicks. |
The photo above shows a 10" frying pan sitting securely on the sturdy racks. This is about the smallest pan for this stove. Other stoves, like the gravity flow models, can cook meals every day and are very easy to light and use without burning your dinner. The #2698 can be used as an every day stove as well, but for heavy duty cooking and canning this is the best stove I have ever used.
Far left, the Butterfly #2698 heated 4 gallons of water in a 20 quart stock pot to boiling within 20 minutes. Near left, a crummy folding Coleman oven has been quickly heated to 300 degrees. Coleman ovens have no insulation, and in fact have huge gaps between the sides and the bottom and top plates. The Butterfly #2421 oven is insulated and vastly superior for actual use as an oven. |
NOTE: The Butterfly #2698 stove - as well as all other kerosene stoves - should be broken in by burning in a well ventilated area free from strong drafts. Let the stove burn for several hours. That will season the metal and burn off any protective oil on the catalytic converter. Then the stove will be ready for use indoors.
Because the Butterfly #2698 produces 14,000 BTU/hr and has a fuel tank large enough for 12 to 18 hours of operation, it can be used for heating a greenhouse, for example. Just remember that the design of a stove is for the flame to impact something, so use the stove properly if used as a heater.
When not in use, the Butterfly #2698 can be stored in the factory shipping box, ensuring that it is clean and dust free when needed. Be sure to store the stove "dry," empty of fuel, to avoid any condensation in the fuel tank. See Stove Maintenance and Storage.
WARNING: Kerosene stoves were designed to burn kerosene. DO NOT attempt to burn gasoline in a kerosene stove! See Kerosene Fuel Primer for more information.
Pages on this web site:
Kerosene Stoves, Lanterns and Ovens
- Kerosene Stoves - Recommendations on different models New!
- Kerosene Stove Maintenance and Storage
- Butterfly A-822, 22 wick, all-aluminum premium stove. New!
- Butterfly #2487, 16 wick stove.
- Butterfly #2412 Pressure Stove;
- instructions for virtually any pressure stove.
- Butterfly #2418 Double Burner Stove;
- good with any gravity flow stove.
- Butterfly #2421 Oven for Kerosene Stoves
- Butterfly #2641, 10 Wick Stove -
- the least expensive emergency stove.
- Butterfly #2698 Cook Stove -
- THE Best Heavy Duty Cook Stove.
- Butterfly #828R Pressure Lantern;
- same for most pressure lanterns.
- Haller "Origineel" Stoves
- Mini kerosene heaters;
- also mini stoves made from old brooder lamps.
- Sad Iron stoves;
- examples of, and wick replacement. Wicks are here.
- "Wickless" Stoves & Ranges,
- and wicking for them.
Butterfly #2412 Pressure Stove
THE BUTTERFLY #2412 PRESSURE STOVE

Kerosene pressure stoves have been used for over a century precisely because they are reliable and versatile. They will work at high altitude and when burning poor quality fuel. And they burn HOT, boiling 6 cups of water in less than 7 minutes, so cooking or purifying water is fast.
(Above, photo of my pressure stoves for testing: Primus No. 96 version 5, late 1920's; Aida #100, 1960's; Butterfly #2412, current; Karan #212, 1997.)
Both the Primus No. 96 and Aida No. 100 shown in the photograph above were designed so the burner could be removed and the fuel tank sealed, but those stoves have not been available for years. The Butterfly #2412 is the only pressure stove available today designed for really portable use! Combined with the multi-fuel capabilities of this stove, this makes it one of the most versatile and valuable stoves anyone could ask for to use in an emergency situation.
The Butterfly #2412 Brass Pressure stove is made from solid brass. Included with the brass stove are 3 removable stove supports, 3 pick tools for cleaning, a wrench to disassemble the burner, and a brass cap that seals the tank when the burner assembly is removed. It holds .9 litres of fuel. Height is 21cm (8.25 inches), width 20cm (7.9 inches), weight 1.25kg (2 lbs 12 oz), heat output maximum of 9000 btuh. It will burn over 3 hours on a tank of fuel. St.PaulMercantile.com is the source for Butterfly stoves and pressure lanterns. |
The Butterfly 828 pressure lantern makes a fine companion piece to the Butterfly pressure stove. For more information on the 828 lantern, click here.
Butterfly #2418 Double Burner Stove
BUTTERFLY #2418 DOUBLE BURNER STOVE
(The operating instructions apply to all of the Butterfly gravity flow stoves as well as Wards and other gravity flow "wickless" stoves made in America in the first half of the 20th century.)
For those living in a safe location, the best kerosene cook stove I have used is the Butterfly #2418 double burner stove. This stove is large, measuring approximately 30 inches long, 12 inches wide and a foot high, and weighs about 14 pounds. This size and weight makes the #2418 extremely stable in use, and the two burners allow meals to be easily cooked. You can even cook on one burner while using the oven over the other burner. This is a saturated wick design stove, which means the fuel is fed to the wick through a valve, and it is the valve which controls the flow of fuel, and therefore the flame height or BTU output. That means this stove is designed to be used on a level counter top, not perched among rocks beside a tent. Yes, you can move the #2418, but it was designed for everyday use in a fixed location rather than as a camping or portable stove. In the Philippines and Indonesia, in fact throughout most of the Far East and Southeast Asia, this is the stove of choice for every day use, if they can afford it. The alternative is to cook with twigs under a grate...rather primitive at best.
Notice that the glass fuel tank fits between the burners into a protected hole in the heavy top plate. The "saturated wick" image shows the fixed wick design and the bottom of the catalytic converter: the wick does not raise or lower to adjust the flame height as is the case with every other wick stove or heater I have ever seen. With gravity flow or "wickless" stoves, fuel flow or volume determines the amount of heat output, and that is controlled by minor turning of the red handle.
St.PaulMercantile.com was the source for Butterfly stoves and pressure lanterns. John Squires, owner of St. Paul Mercantile.com, passed away in April, 2025. John operated the business in a very ethical manner for many years and will be greatly missed. I do not know from whom Butterfly stoves will be available now. |
To use the Butterfly #2418, the fuel tank is filled, then inverted and lowered by the wire handle into a receptacle. The fuel tank cap has a protruding pin held open by a spring, and when the tank is in position, the pin is pushed up and fuel can flow into the tube assembly via gravity. Opening the red valve under the burner allows fuel to flow to the wick, which then becomes saturated with fuel in about a minute or two. The catalytic converter unit is then raised and the wick touched with a match, and the top edge of the wick burns the fuel. At first the flame is a bit high, a result of the catalytic converter unit not being up to operating temperature and the saturated nature of the wick.
Controlling the height of the flame is done by closing the valve, then opening it up about 1/8th of a turn. Only slight turning of the red knob is necessary to adjust the heat output, but remember that there is already fuel in the wick, so adjustments usually take about 20 to 30 seconds to become effective. Moral of the story: be patient when adjusting the flame height, and you will soon become accustomed to its operation. You will be rewarded with totally silent operation, even and steady heat, and absolutely reliable operation. To turn off the Butterfly #2418 pressure stove, simply turn off the flow of fuel by gently turning the red knob to the right until it stops. There is no need to twist hard on the red knob and try to damage the needle valve at its bottom. The fuel flow will be stopped by gently turning the valve closed, and in a minute or so the residual fuel will be consumed and the stove will go out.
The fuel reservoir on the Butterfly #2418 Pressure Stove holds 1.85 quarts, and burn time is approximately 12.5 hours per burner. Using both burners reduces the refill time to approximately 6 hours, which is more than adequate for 3 or 4 days of use even when using the oven to bake bread, for example. A gallon of kerosene should be sufficient for a week of cooking and baking normal, regular "made from scratch" meals.
The wick for the Butterfly #2418 is approximately 10 �" by 7/8". This special wick fits down into a thin slot and the top edge only is what supports the flame: the wick itself does not burn, of course. How long will a wick last? In Asia, many users report that wicks can last up to a decade, but they are experienced users. I can guarantee you that your first wick won�t last that long...figure 6 months of every day use for the first wick. After you gain expertise, wicks will last longer. The trick is to never light the wick before it has become saturated with fuel, and when the stove is turned off, to let the flame die out on its own. Once one "side" of a wick has become ragged after long use, turn it upside down and start all over with a new burning edge!
ASSEMBLY HINTS [Refer to the illustration above for details of how the pieces fit together.]
The Butterfly #2418 dual burner stove comes unassembled. All you need for assembly is a flat bladed screwdriver and a 9 mm socket or wrench, or a small crescent wrench. The back and bottom are one piece. Begin by first placing the long tube with fittings for the wicks and tanks (part #808A) on the bottom, with the brackets over the ends, line up the holes, then fasten finger tight only: the unit will be aligned and tightened once assembly is complete. Assembly can easily take 3 hours, so be patient.
Next affix the end pieces: notice they are notched at the bottom. The top plate (part #1002a) is attached next, and when it is tightened up the unit becomes square and straight. Then fit the two flat support braces inside the stove: see the illustration above. The screw flanges are placed facing inward toward the tank, and the narrowest part of the cutout for the tube assembly is placed toward the front (there is a raised section of the base to guide you in this operation � just match up the width of the flange with the base).
Now it is time to assemble the tank. Very carefully bend the top of the wire loops inward, then spring the wire handle loops through the holes in the band projection. Work slowly and carefully � don�t break the glass.
Now put the fuel tank (part #101) down through the center hole in the top plate until it mates with the receptacle. It won�t fit evenly, which is why you left the bracket screws loose. Move the bracket forward or backward until the glass reservoir fits squarely on its base and is centered in the access hole on the top plate of the stove, then tighten the two bolts and nuts on each side of part #808A, and tighten all nuts and bolts on the stove. Next put the red knobbed fuel flow needle valves (part #707) into their tubes, and tighten very gently.
Finally, put the wicks on edge (part #606) into their slots, with the slight opening toward the front (see illustration above), making sure the wicks are seated uniformily at the bottom of their slots.
Lower the catalytic converter (part #505) down over the wicks and wiggle until it is centered, then put the cooking bracket (part #303) on the top plate (match up the 4 holes in the top plate), and you are ready to put fuel into the tank and use the stove!
IMPORTANT:Open the fuel control valve and let the wick become fully saturated before lighting - every time!Just opening the valve for a couple of minutes before use should extend your wick life by a factor of years.
Pages on this web site:
Kerosene Stoves, Lanterns and Ovens
Butterfly #2421 Oven
BUTTERFLY #2421 OVEN FOR KEROSENE STOVES
Bread is the staff of life. And that means baking in an oven. Many dishes like casseroles require an oven. Yes, you could survive without being able to cook in an oven, but please note that our grandmothers felt horribly deprived if they didn't have a proper stove with an oven...everyday cooking virtually mandates it.
The Butterfly #2421 oven is not the same as the Coleman folding camp ovens. The #2421 does not fold up, it is insulated with internal panels, and it has two adjustable racks for baking, all radically different from the Coleman. The #2421 oven does require a high flame height to achieve baking temperatures, but baking temperatures are uniform throughout the oven. The Coleman, being uninsulated, requires an extremely hot flame and the temperature is not uniform, so bread can burn on the bottom before the inside is properly done.
St.PaulMercantile.com was the source for Butterfly stoves and pressure lanterns. John Squires, owner of St. Paul Mercantile.com, passed away in April, 2025. John operated the business in a very ethical manner for many years and will be greatly missed. I do not know from whom Butterfly stoves will be available now. |
The Butterfly #2421 is a relatively large oven at 14 inches square and has an bottom opening of approximately 9" x 10," with a flame plate below the bottom oven rack. It must sit on a large, flat cooking surface. It will not fit on the small #2412 pressure stove or even an Alpaca cook stove, as the Alpaca has four tapered "wings" to support cooking pots only. Of course the oven can be placed on a cooking stand and be supported by the stand over a small stove.
The useable size of the Butterfly #2421 oven is established by the size of the door and by normal thermodynamic principles - ovens work because hot air can flow around the object being baked. The door opening is 11" wide by 9" high. The inside depth is 11". Baking pans of approximately 10" square are about maximum for proper heated airflow on all sides of the pan, and the height of 9" is more than adequate for bread and casseroles, for example.
Many Butterfly stoves have a top rack specifically designed to hold the #2421 oven, including all the gravity-flow models such as the #2413, #2416, #2417, #2418, and many of the multi-strand will also work under the oven, such as the #2457. I have kept a #2457 oven for many years specifically to use with the oven. Years ago I gave a #2413 as shown at right to my mother. Note the top rack which holds the oven securely. |
Photo of two cooking stands I made to support very heavy things like a water bath canner or hot juice dispenser for filling canning jars. My Butterfly #2418 double burner stove is barely visible on the lower left corner of the
Pages on this web site:
Kerosene Stoves, Lanterns and Ovens
Butterfly #828R Pressure Lantern
Butterfly Pressure Lantern 828

The Butterfly #828 pressure lantern is perhaps the most fuel efficient way to light a home. Enough light is produced by which to easily read, and that is at a low setting! The #828 is rated at approximately 400 cp, but the pressure can be reduced to put out about 150 cp while also reducing the noise of the lantern to barely above a whisper. At right is one of my #828's hanging from a swag hook in the front room ceiling. The position is behind and between both of our recliners, so light falls directly on the pages of a book. Another #828 hangs from a swag hook in the middle of the kitchen ceiling. |
St.PaulMercantile.com was the source for Butterfly stoves and pressure lanterns. John Squires, owner of St. Paul Mercantile.com, passed away in April, 2025. John operated the business in a very ethical manner for many years and will be greatly missed. I do not know from whom Butterfly stoves will be available now.
BUTTERFLY PRESSURE LANTERN PARTS
An extremely bright lantern, t
he Butterfly pressure lantern can light up a very large room. It is as bright as 3-4 100-watt light bulbs (using 500 CP mantles, included). They attain their brightness because they vaporize the kerosene (instead of burning liquid kerosene) and deliver the pressurized kerosene vapor to the mantle. Kerosene has more energy, drop for drop, than propane. Additional energy translates into more light. New lanterns are now being shipped with 3 350 candlepower mantles plus 3 500 candlepower mantles. I have spare parts in stock if you should ever need them.The Butterfly 828 Pressure Lantern burns kerosene, including red dye kerosene, with extreme efficiency. Under adverse conditions they will burn home heating fuel and even diesel, but old or ''found'' fuels should first be filtered through several layers of coffee filters to remove any small pieces of debris.
The pressure kerosene lantern was patented in Germany in 1910 by and used all over the world since then by military units, in field hospitals and kitchens, anywhere bright, reliable light was needed. The Butterfly is a close copy of the original and widely used worldwide.
WARNING: THESE LANTERNS ARE NOT FOR EVERYONE. If you are not mechanically inclined or want an instant light without any work, you should use a wick-type lamp or a battery powered lantern. If you want to light a small room, this lantern may be too powerful for you. If you want a lantern that will burn a variety of various oils and produces a considerable amount of light very efficiently, AND you have some mechanical skills and are not in a hurry, this lantern is magnificent.
How to start your kerosene pressure lantern
You need: |
Fuels
Petromax / Butterfly 828 Owner's Manual
Ordering has moved to WickShop.com – everything else here stays the same.All the wick charts, heater lists, photos and how-to pages on this site are staying right where they are. Only buying has changed: use any “Order on WickShop.com” button to order that item with secure online checkout (current prices are on WickShop.com).




















