CENTER DRAFT LAMP WICKS

WICKS FOR B & H, RAYO, P & A ROYAL, MILLER, PARKER,
("GWTW"), including RAYO JR and STORE LAMPS
#0C, #0S, #0L - #1R - #1M - #1BS - #1S - #1BT -
#2L - #2-P&A - #2B - 2R - #3L
MILLER DRESDEN AND VESTAL WICKS
Custom Wicks for Rare Lamps
Globe Vulcan Wicks & Chimneys
Flat lamp wicks - Kosmos Lamp wicks
Aladdin Lamp Wicks - Center Draft Lamp Chimneys
Photos of Center Draft Lamp Wicks and Assemblage
Conversion chart - Inches to Millimeters
CENTER DRAFT LAMPS - Photos, illustrations & information
How to Identify Center Draft and Kosmos Lamps
Installation and lamp operating instructions are supplied NEW!!! - SPECIFIC WICK INSTALLATION INSTRUCTIONS (8.4.26) |
I am doing what I can to keep Victorian era lamps in use, for they are not only works of art but functional lighting devices. Wicks have not been available since the 1930's for many of these lamps. The demand for wicks for century-old lamps is not great, but I have had small lots of the wicks made to my specifications, which included sending original, unused vintage wicks the original wicks to use as a comparison. These wicks have been thoroughly tested in my lamps as well as by some well recognized lamp experts. The small production lots are expensive to make, but the wicks are of top quality and will last for a long time. Below you will find wicks to fit virtually every center draft lamp ever made. Wicks for Victorian era flat wick lamps, such as B&H Student Lamp Duplex burners and British Duplex lamp burners, are here.
Beginning in March, 2009, I had rare chimneys duplicated in sturdy, heat-resistant borosilicate glass so that proper burning characteristics can be achieved. These absolutely perfect chimneys fit Success lamps, Belgian 20''', Radiant #5's and Miller's Liberty and Dresden lamps, Imperial/Vulcan lamps and the unusual "mammoth" chimney for the B&H #89, Globe Incandescent #2 and the Pittsburgh Mammoth requiring a wasp-waist 4 1/2" chimney as well as 4" store lamp chimneys. I also often have common sizes of center draft chimneys available in Junior ("0") size, 2 1/2", 2 5/8" fitter sizes. In early 2012 I had the fabulous "Sans Rival" 14''' Kosmos chimneys and Student Lamp chimneys made from borosilicate glass. 2014 saw Globe Vulcan chimneys in 24''' and 30''' and the tiny 1.445'' fitter for "Tiny" center draft lamps. In 2018 I introduced a fabulous new chimney of my design for 20''' Matador lamps - a NeoVulcan 20''' Matador.
Miles Stair
Wick Measurements for B&H, P&A, Manhattan, etc.
Wick Measurements for Miller lamps, click here.
Lamp manufacturers and lamp trade names.
See CARE, FEEDING (and minor restoration) OF OLD KEROSENE LAMPS
and
Burner Venting, Candle Wicking
The Safe Use of Kerosene Lamps
Now you can get all your old lamps working properly again! I have wicks for virtually every center draft lamp ever produced, regardless of age. |
[A MORE COMPLETE LISTING OF OBSCURE LAMPS IS AT THE BOTTOM OF THIS PAGE]
CENTER-DRAFT LAMP WICKS | Shop at WickShop.com | |
Miller "Sundart"Incandescent and Coleman #160 Kero-Liteuse the Aladdin 1" lamp wicks with carrier or clips removed. Click here. For Miller Dresden and Vestal wicks, click here. | ||
| #0C | #0C Wick for Manhattan, Kleeman Student Lamps. Includes complete, illustrated installation and operating instructions. 1 1/4" flat X 4.5" long, 0.055" thick. Also for the C. T. Ham Mfg. Co. Rochester NY steam engine headlight. [Photos of lamps] | Order on WickShop.com |
| #0S | New! #0S Special wick for "Tiny," "Little" and other "0 size" center draft lamps with small and shallow fonts. 1 1/4'' flat x 7'' long, 0.055'' thick. Perfect for the Tiny Miller, Tiny Juno, Miller Home Lamp, Little Royal, Little Jewel, Little Trenton, B&H Mini, Royal metal miniature table lamps (not finger lamp), Little Prince, many "finger Lamps" - particularly lamps using the small 1.455" slip fit chimney. Cleveland Safety Library Lamps. [Photos of Tiny Lamps] [Photo of Miller Home lamp burning new #0S wick with Jr./0 Size chimney.] price on WickShop [Note: Miller Ideal #0 Student Lamp wicks are 1 1/8" flat measure - this wick will not fit them but they are available as a custom wick.] (measure first). | Order on WickShop.com |
| #0L | #0L - #0 size 1 1/4" x 8'' Center Draft Circular (tubular) wick (0.065" thick). For full size "0" size lamp fonts and those lamps requiring a longer and thicker wick. For Photo of wick below. (Photos of lamps using wick #0L - see Photo Album) price on WickShop [Note: Miller Ideal #0 Student Lamp wicks are 1 1/8" flat measure - this wick will not fit them.] | Order on WickShop.com |
| #1R | #1R - 1" Rayo Jr. Center Draft Circular wick (tubular) (1 9/16" flat x 8" long, 16 "line"'). For Rayo Jr., B&H Jr. lamps and other circa 1900 lamps which use a thick 1" wick - the Lempereur & Bernard (L&B) Brevette (not 20'''), Hasag Adonis, and lamps made in Turkey and Russia with a draft tube of 0.89" and a thick wick; draft tube 0.86" and a thin wick use a custom made wick. (This is not a Miller #1 nor is it a 20''' Belgian - see below.) Photo belowMeasurements below. Photo of Rayo Jr. lamp. price on WickShop | (Sewn to fit properly)|
#1M - Miller #1 (Standard thickness). Center Draft Circular wick (1 7/8" flat x 7 7/8" long, 1" diameter center draft tube, 0.082" thick). Success (P.L.B.&G), Juno #1; No 1 Rochester, No 1 Trenton, Yale, Haida and Bristol, Meriden Bronze Co Junior Bristol. Miller's Vestal #1, Miller "Ideal" No. 1 Student Lamp, New Darling, No 1 junior Royal; P & A Royal #1 Finger Lamp, B&H No.1 Junior and others with a 1" to 1.26" draft tube but require a thinner wick than 20''' European lamp such as the L&B Brevette. Wick installation instructions forSuccess, Pittsburgh Lamp & Brass Co. (P.L.B.&G Co.). Photo of Success lamp burning.
Best 20''' wick
#2L
#2L - Rayo 1 1/2" diameter wick (2 1/2'' flat, 7 1/2" long, 0.082'' thick). THIS WICK IS custom made, NOT A HATTERSLEY WICK. Miller, Juno, New Juno; Rochester, & other center draft lamps with an inside wick sleeve, draft tube approx 1.4'' diameter. B&H, Gaskell, Factory, Parker, Gladstone, Pittsburgh, Bristol, Aurora, New Aurora No 2, Ansonia, Hipwell, Meyrose, Connecticut, Day Light, Keystone, Wheeling, Haida, Princeton, Victor, Wellington, U. S. Trenton, Yale, M&W 97, New Rochester, Rival, Hugo Schneider, The American Eureka Lamp Co., Rayo 22 and many "GWTW" lamps. 14" Star locomotive headlamp. NOT FOR Miller Vestal #2 (Too thick: The Vestal has the wick knob in the burner. Vestal wick click here). (Click here for Installation help.) For draft tube about 1.400'' to 1.480'' in diameter. Measurements below.(Photos of lamps using wick #2L)
#2 P&A
#2-P&A - 1 1/2" Center Draft wick for P&A Royal lamps; (2 5/8" flat by 8 3/4" long, 0.102" thick). Magnet,
#2B
#2R
#3L
#3L - 2 9/16" Store Lamp. Center Draft Circular Wick. For lamps such as Rochester Lamp Co #3, Bradley & Hubbard #89, 92, 95 & 96, Miller #3, Juno #3, P&A Banner #3, Empress #3, #3 Bristol Brass Mammoth and Standard (Globe Incandescent #2) store lamps. Measured flat, wick is approx 4 3/16" wide and 8" long and fits draft tubes 2.5'' diameter. See photo below.Measurements below.(Photos of lamps using wick #3L) Store lamp chimneys 4'' base diameter here & here. (Mammoth lamp 4/1/2" chimneys here.)
`
|
|
|
| |
#0L | #1M | #1S | #2L | #3L |
WICK THICKNESS AND OTHER MEASUREMENTS
Wick thickness and weave is incredibly important. Victorian era lamp manufacturers were in intense competition to produce lamps with the greatest possible light output per fuel consumption, and their methods of achieving that were different. Miller designed the easiest wick replacement system and brilliantly designed flame spreaders to achieve a tall, white light from a thin wick. P&A used a nominal 1 1/2" diameter wick on their Royal burners which was thicker on the outside of the wick to induce greater capillary action and thus produce a fine white light with the same draft tube measurements as a Miller or B&H (Thinner Rayo wick burned in a P&A #2 lamp). The L&B "Belgian" 30''' lamp used a nominal 1 1/2" diameter wick with the extra thickness on the inside of the wick, requiring a smaller diameter draft tube. The Belgian 30''' design was so superb that is was copied by B&H's Radiant #5, P&A's Plumwood, and Miller's Dresden #2 & #3, Liberty 2/0 and Empress #3. The L&B Belgian 20''' wick is 1 1/4" diameter (with a dense weave) and thicker on the outside of the wick than standard #1 wicks, and was copied by B&H Radiant #4, P&A Banner Electric, Hinks and Veritas. The Success wick is smaller in diameter and thinner than the Belgian 20'''. The Rayo Jr. used a thick 1" diameter wick (0.083"). None of these wicks are interchangeable! (I measure wick thickness with Ames Thickness Gauges.) Wicks which are too thin do not fill the wick gap; the wick itself can burn down the wick tube, and if not put out in time can cause a fire/explosion in the font. The wick on the right is an example - a thin Miller #1 used in a Success lamp - and the wick was burning down the wick tube toward the fuel! My wicks are designed to ensure the same capillary action as original factory wicks - and thoroughly tested by lamp experts in a variety of lamps. | Click to see where to measure |
CENTER DRAFT LAMP WICK INSTALLATION
Wick Measurements:
The measurements below are some quick reference measurements for lamps made by B&H, P&A, Manhattan, etc. Below this first chart is another with more lamps listed. For measurements for Miller lamps, click here.
WICK No. | WICK DIAMETER NOMINAL DIMENSIONS | Width, Pushed FLAT | THICKNESS, approximate | DRAFT TUBE DIAMETER | OUTSIDE WICK TUBE DIAMETER | Chimney base diameter, outside |
| OS | 3/4'' x 7'' | 1 1/4'' | 0.055'' | 22/32'' | 7/8'' | 1.455" |
| 0L | 3/4" X 7 3/4" | 1 1/4" | 0.065" | 22/32" | 7/8" | 1.5" |
| 1R | 1" x 8 1/2" | 1 11/16" | 0.083" | 3/4" | 1 1/4" | 2" |
| 1M | 1 1/8" x 8" | 1 7/8" | 0.073" | 1.0" | 1 5/16" | 2" |
| 1S | 1 1/4" X 8" | 1 11/16" | 0.085" | 1.160" | 1.480" | 2.3875" (rare early, 2..48" later) |
| #1BS | #1BS | 1 7/8" | 0.080" | 1.20" | ||
| 1BT | 1 1/4" x 9" | 2" | 0.102" | 1.131" ID | 1.476" ID | 2.4" |
| 2L | 1 1/2" X 8" | 2 9/16" | 0.092" | 1.430 | 1.600" | 2 5/8" |
| 2M | 1 1/2" x 7 1/2" | 2 1/2" | 0.082" | 2 1/2" | ||
| 2B | 1 1/2" X 9" | 2 1/2" | 0.111" | 1.468" | 1.750" | 2 15/16" |
| 2 P/A | 1 1/2 x 8 3/4" | 2 5/8" | 0.116" | 1.411" | 1.800" | 2 5/8" |
| 3L | 2 1/2" X 8 1/2" | 4 3/16" | 0.113" | 2 15/32" | 2 3/4" | 4" or (4 1/2" Mammoth) |
CENTER DRAFT LAMP CHIMNEYS (Click here)
MEASUREMENTS AND COMMENTARY Begun by ALEX MUZYKA, continued by Miles Stair - Click here. Please note that these measurements sometimes reflect a single sample, when a production run of a single series could have run for a decade or more. I have tried to list them from smallest to largest. The list is incomplete and more lamps will be listed as I find the time. If a P&A Royal is listed as using a 2 5/8" chimney, for example, it does not mean that all P&A Royal lamps used a 2 5/8" chimney. Those underlined in blue are links to the chimneys and wicks I have. More photos are available in the Photo Album.
Lamp Type | Draft Tube OD | OW Tube ID | Requires | Chimney | Sub OK * |
0.443" | 0.573" | Not avail. | 1 1/8" x 5.5" | Nutmeg | |
| Heinrichs & Knopp | 0.566" | 0.786" | #0C | 1 7/8" | Student |
| Carcel (sample of 1) | 0.625" | 0.8125" | |||
0.640" | 0.970" | custom | |||
| Manhattan Student | 0.658" | 0.909" | #0C | 1 7/8" | |
0.677" | 0.892" | #0S | 1.60" - "0" Jr. | ||
| Miller "Home" lamp | 0.686" | 0.909" | #0L | OM | |
0.693" | 0..882" | #0S | 1.60 - "0" Jr. | ||
0.696" | 0.890" | #0S | 1.60" - "0" Jr. | No | |
| Stobwasser | 0.712" | 0.860" | |||
| Sinumbra | 0.712" | 0.865" | |||
0.726" | 0.932" | Custom | 1.475" | ||
0.775" | 1.03" | 0.105" thick. | No | ||
0.780" | 0.990" | 1.90" | |||
| Veritas ''The Reader" | 0.791" | 1.071" | Custom | 1.88" | |
| Young's Court 16''' | 0.792'' | 1.067 | Custom | ||
| Ditmar Soliel 15''' | 0.812" | 1.042" | Custom | 2.06" | |
| W&W Vulcan 16''' | 0.857" | 1.146" | Custom | 16'' | |
| Argand (sample of 1) | 0.84" | 1.00" | |||
| Post & Co. Student | 0.880" | 1.00" | Custom | 1 7/8" | |
0.880" | 1.115" | #1R | Yes | ||
| W&W Vulcan 18''' | 0.980" | 1.05" | Custom | 18''' | |
| San Diego | 0.933" | 1.160" | Custom | ||
| Miller "Ideal" Student | 1.0" | 1.25" | Custom | 1 7/8" | |
| Ditmar Soliel 18''' | 1.02" | Custom | 2.428" | ||
| Veritas 20''' | 1.02" | 1.388" | #1BT | 2.49" | |
Miller Juno Jr. | 1 1/32" | 1 9/32" | #1M | No | |
20''' Young's Court | 1.07" | 1.40" | #1BT | 2.5" | No |
1.09" | 1 3/8" | #1BS | No | ||
1.035" | 1.271" | #1M | |||
| German Student "Imperial" | 1.065" | 1.301" | Custom | ||
1.072" | 1.356" | #1BS | |||
| Large Manhattan Student 10" | 1.156" | 1.33" | Custom | We have it! | |
1.085" | 1.310" | #1M | |||
Dresden/Liberty #1 | 1.075 | 1.340" | #1BS | No | |
Liberty (Meriden Bronze) | 1.02" | 1.31" | #1BS | ||
1.085" | 1.440" | #1BT | No | ||
1.160" | 1.480" | #1BS | No | ||
from 1.06'' to 1.178" | 1.440" | #1M | No | ||
| Little Darling | 1.26" | 1.480" | #1BS | 2 1/8" | No |
| Toronto Light King | 1.308" | 1.750" | #2 P&A | 2 5/8" | |
1.400" | 1.785" | #2B | |||
1.433" | 1.843" | #2B | No | ||
B&H Radiant #5 | 1.38" | 1.700" | #2B | No | |
Banner w/Twist Raiser (a few at least) | 1.400" | 1.78" | #2 P&A | ||
1.401" | 1.80" | #2 P&A | No | ||
Master Stand #2 | 1.415" | 1.785" | Custom | ||
Rayo | 1.432" | 1.600" | #2L | ||
Consolidated | 1.420" | 1.750" | #2 P&A | ||
New Aurora | 1.450" | 1.685" | #2L | ||
1.437" | 1.650" | #2L | No | ||
1.444" | 1.851" | #2B | No | ||
1.447" | 1.682" | #2L | No | ||
| 30''' Vulcan, Search | 1.480" | 1.780" | Custom | 30''' | |
2.500" | 2.871" | #3L | No | ||
2.518" | 2.886" | #3L | No | ||
B&H #89, 96 | 2.500" | 2.888" | #3L | No |
MILLER DRESDEN AND VESTAL WICKS
Note from the Miller advertisement below that Miller had a distinct category for both Dresden and Vestal wicks. Dresden wicks were thicker than standard #2 size wicks whereas wicks for Vestal burners were thinner. Wicks for Dresden lamps are #2B, above.
Wicks for Miller Vestal lamps were thinner than wicks for earlier (pre-1903) Miller lamps as the wick adjusters were in the burner rather than in the font and they used a thicker, more standard type of wick sleeve. With the draft tube and outer wick tubes being the same dimensions, fitting in the larger, thicker wick sleeve left less room for the wick itself, hence the wicks had to be thinner. The standard thickness wicks work in #0 and #1 Vestal burners but the #2 does require a wick no thicker than 0.075'' thickness.
A thinner wick means less capillary action which translates to less fuel being delivered to the top of the wick for burning - fuel starvation. Trying to force a full curl flame from a #2 Vestal with a thin wick will result in burning down the wick at an accelerated pace: a lower flame, no higher than the top of the flame spreader, can be maintained without excessive wick consumption. Wicks for #2 Vestal lamps have to be custom made from thinner wick material as the wicks are no longer commercially manufactured. For availability of custom-made #2 Vestal wicks, email contact us, also available on the Custom Wick page (click here).
The image below was scanned from a reproduction of an old catalog. Sorry it is blurry, but the image from the catalog itself appeared to be a reproduction. |
Photo Images of center draft lamp wicks
Click on any image to enlarge it
#0L. 3/4" Center Draft Circular wick (1 1/4" x 7 3/4" flat). For Miniature Table Lamps, some "Finger Lamps," Manhattan Student lamp, the tiny Juno, Royal metal miniature lamps, etc. Click on any image to enlarge it. | |
#1R. 1" Rayo Jr. Center Draft Circular wick (1 11/16" flat x 7 7/8", 16 "line"'). For Rayo Jr. lamps and other circa 1900 lamps which use a 1" diameter wick. Some references call this a #1 wick. | |
#2L. Rayo, B & H, Miller, Parker and other "GWTW" lamps taking a 1 1/2" diameter circular wick, 7 1/2" long (2 1/2" flat, 30 "line"'). | |
#2B. Slightly thicker and longer than the Rayo wick above, 1 1/2" diameter circular wick, 8 3/4" long (2 1/2" flat). 30 "line"'. | |
#3L. 2 9/16" diameter. Store Lamp. Center Draft Circular Wick.. When measured flat, wick is approx 4 3/16" wide and 8 1/2" long. |
`
A MORE COMPLETE LISTING OF OBSCURE LAMPS - Wick Available above. | |
OXL- 1 1/4" flat; 7 3/4" long | <<<<<<<<<<<<<< |
OL- Miller Short - 1 1/4" flat; 6 1/4" long - Trim-to Length 5 " | Little Jewel |
OL - Miller Long - 1 1/4" flat - 8" long | Miller #0 "Vestal" - Trim-to Length 7" |
#1R - Rayo Jr. - 1 11/16" flat - 8 " long | B & H Jr. |
#1L - #1 Miller - 1 7/8" flat - 8" long | Meteor #1; Trim-to 6" |
#1BS - Success - 2" flat - 8" long | Mammoth Perfection Student; Trim-to 4" |
#2L - Rayo - 2 " flat - 7 1/2" long
| Meyrose #2; Trim-to Length 6 " |
A MORE COMPLETE LISTING OF OBSCURE LAMPS - Wick Available above. | |
OXL- 1 1/4" flat; 7 3/4" long | <<<<<<<<<<<<<< |
OL- Miller Short - 1 1/4" flat; 6 1/4" long - Trim-to Length 5 " | Little Midget |












